Volume 1 Issue 4
December  2022
Turn off MathJax
Article Contents
Junjie Wang, Danyang Li, Jian Wang, Junbiao Peng. Efficient emission of quasi-two-dimensional perovskite films cast by inkjet printing for pixeldefined matrix light-emitting diodes[J]. Materials Futures, 2022, 1(4): 045301. doi: 10.1088/2752-5724/ac9b2d
Citation: Junjie Wang, Danyang Li, Jian Wang, Junbiao Peng. Efficient emission of quasi-two-dimensional perovskite films cast by inkjet printing for pixeldefined matrix light-emitting diodes[J]. Materials Futures, 2022, 1(4): 045301. doi: 10.1088/2752-5724/ac9b2d
Paper •
OPEN ACCESS

Efficient emission of quasi-two-dimensional perovskite films cast by inkjet printing for pixeldefined matrix light-emitting diodes

© 2022 The Author(s). Published by IOP Publishing Ltd on behalf of the Songshan Lake Materials Laboratory
Materials Futures, Volume 1, Number 4
  • Received Date: 2022-08-16
  • Accepted Date: 2022-10-18
  • Publish Date: 2022-11-17
  • Quasi-two-dimensional (quasi-2D) perovskites are promising materials for potential application in light-emitting diodes (LEDs) due to their high exciton binding energy and efficient emission. However, their luminescent performance is limited by the low-n phases that act as quenching luminescence centers. Here, a novel strategy for eliminating low-n phases is proposed based on the doping of strontium bromide (SrBr2) in perovskites, in which SrBr2 is able to manipulate the growth of quasi-2D perovskites during their formation. It was reasonably inferred that SrBr2 readily dissociated strontium ions (Sr2+) in dimethyl sulfoxide solvent, and Sr2+ was preferentially adsorbed around [PbBr6]4− through strong electrostatic interaction between them, leading to a controllable growth of quasi-2D perovskites by appropriately increasing the formation energy of perovskites. It has been experimentally proved that the growth can almost completely eliminate low-n phases of quasi-2D perovskite films, which exhibited remarkably enhanced photoluminescence. A high electroluminescent efficiency matrix green quasi-2D perovskite-LED (PeLED) with a pixel density of 120 pixels per inch fabricated by inkjet printing technique was achieved, exhibiting a peak external quantum efficiency of 13.9%, which is the most efficient matrix green quasi-2D PeLED so far to our knowledge.

  • loading
  • [1]
    Sutherland B R and Sargent E H 2016 Perovskite photonic sources Nat. Photon. 10 295–302
    [2]
    Xiao Z, Kerner R A, Zhao L, Tran N L, Lee K M, Koh T-W, Scholes G D and Rand B P 2017 Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites Nat. Photon. 11 108–15
    [3]
    Zhang L et al 2017 Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes Nat. Commun. 8 15640–7
    [4]
    Ma D et al 2021 Distribution control enables efficient reduced-dimensional perovskite LEDs Nature 599 594–8
    [5]
    Lin K et al 2018 Perovskite light-emitting diodes with external quantum efficiency exceeding 20 percent Nature 562 245–8
    [6]
    Jiang J, Chu Z, Yin Z, Li J, Yang Y, Chen J, Wu J, You J and Zhang X 2022 Red perovskite light-emitting diodes with efficiency exceeding 25% realized by cospacer cations Adv. Mater. 34 2204460
    [7]
    Singh M, Haverinen H M, Dhagat P and Jabbour G E 2010 Inkjet printing—process and its applications Adv. Mater. 22 673–85
    [8]
    Zheng H et al 2013 All-solution processed polymer light-emitting diode displays Nat. Commun. 4 1971–7
    [9]
    Gans B-J D, Duineveld C and Schubert U S 2004 Inkjet printing of polymers: state of the art and future developments Adv. Mater. 16 203
    [10]
    Wei C et al 2022 A universal ternary-solvent-ink strategy toward efficient inkjet-printed perovskite quantum dot light-emitting diodes Adv. Mater. 34 2107798
    [11]
    Li D, Wang J, Li M, Guo B, Mu L, Luo Y, Xiao Y, Mai C, Wang J and Peng J 2022 Efficient red perovskite quantum dot light-emitting diode fabricated by inkjet printing Mater. Futures 1 015301
    [12]
    Wang J et al 2021 Inkjet-printed full-color matrix quasi-two-dimensional perovskite light-emitting diodes ACS Appl. Mater. Interfaces 13 41773–81
    [13]
    Li D, Wang J, Li M, Xie G, Guo B, Mu L, Li H, Wang J, Yip H-L and Peng J 2020 Inkjet printing matrix perovskite quantum dot light-emitting devices Adv. Mater. Technol. 5 2000099
    [14]
    Liu T et al 2019 Tailoring vertical phase distribution of quasi-two-dimensional perovskite films via surface modification of hole-transporting layer Nat. Commun. 10 878–87
    [15]
    Byun J, Cho H, Wolf C, Jang M, Sadhanala A, Friend R H, Yang H and Lee T-W 2016 Efficient visible quasi-2D perovskite light-emitting diodes Adv. Mater. 28 7515–20
    [16]
    Cho H et al 2015 Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes Science 350 1222–5
    [17]
    Xing G, Wu B, Wu X, Li M, Du B, Wei Q, Guo J, Yeow E K L, Sum T C and Huang W 2017 Transcending the slow bimolecular recombination in lead-halide perovskites for electroluminescence Nat. Commun. 8 14558–66
    [18]
    Kong L et al 2021 Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices Nat. Commun. 12 1246–53
    [19]
    Xing J et al 2018 Color-stable highly luminescent sky-blue perovskite light-emitting diodes Nat. Commun. 9 3541–8
    [20]
    Jin G et al 2022 Low-dimensional phase suppression and defect passivation of quasi-2D perovskites for efficient electroluminescence and low-threshold amplified spontaneous emission Nanoscale 14 919–29
    [21]
    Yuan S, Wang Z-K, Xiao L-X, Zhang C-F, Yang S-Y, Chen B-B, Ge H-T, Tian Q-S, Jin Y and Liao L-S 2019 Optimization of low-dimensional components of quasi-2D perovskite films for deep-blue light-emitting diodes Adv. Mater. 31 1904319
    [22]
    Wang F, Wang Z, Sun W, Wang Z, Bai Y, Hayat T, Alsaedi A and Tan Z 2020 High performance quasi-2D perovskite sky-blue light-emitting diodes using a dual-ligand strategy Small 16 2002940
    [23]
    Pang P et al 2020 Rearranging low-dimensional phase distribution of quasi-2D perovskites for efficient sky-blue perovskite light-emitting diodes ACS Nano 14 11420–30
    [24]
    Guo Z et al 2021 Promoting energy transfer via manipulation of crystallization kinetics of quasi-2D perovskites for efficient green light-emitting diodes Adv. Mater. 33 2102246
    [25]
    Lau C F J et al 2018 Enhanced performance via partial lead replacement with calcium for a CsPbI3 perovskite solar cell exceeding 13% power conversion efficiency J. Mater. Chem. A 6 5580–6
    [26]
    Pérez-Del-Rey D, Forgács D, Hutter E M, Savenije T J, Nordlund D, Schulz P, Berry J J, Sessolo M and Bolink H J 2016 Strontium insertion in methylammonium lead iodide: long charge carrier lifetime and high fill-factor solar cells Adv. Mater. 28 9839–45
    [27]
    Zhang H, Shang M-H, Zheng X, Zeng Z, Chen R, Zhang Y, Zhang J and Zhu Y 2017 Ba2+ doped CH3NH3PbI3 to tune the energy state and improve the performance of perovskite solar cells Electrochim. Acta 254 165–71
    [28]
    Long H, Peng X, Lu J, Lin K, Xie L, Zhang B, Ying L and Wei Z 2019 Exciton–phonon interaction in quasi-two dimensional layered (PEA) 2 (CsPbBr3) n-1PbBr4 perovskite Nanoscale 11 21867–71
    [29]
    Yu M et al 2019 Control of barrier width in perovskite multiple quantum wells for high performance green light–emitting diodes Adv. Opt. Mater. 7 1801575
    [30]
    Ni L et al 2017 Real-time observation of exciton–phonon coupling dynamics in self-assembled hybrid perovskite quantum wells ACS Nano 11 10834–43
    [31]
    Li J et al 2020 Strontium ion B-site substitution for spectral-stable blue emitting perovskite light-emitting diodes Adv. Opt. Mater. 8 2001073
    [32]
    Pazoki M, Jacobsson T J, Hagfeldt A, Boschloo G and Edvinsson T 2016 Effect of metal cation replacement on the electronic structure of metalorganic halide perovskites: replacement of lead with alkaline-earth metals Phys. Rev. B 93 144105
    [33]
    Yuan S et al 2021 Efficient and spectrally stable blue perovskite light-emitting diodes employing a cationic π-conjugated polymer Adv. Mater. 33 2103640
    [34]
    Shen Y et al 2020 Interfacial potassium-guided grain growth for efficient deep-blue perovskite light-emitting diodes Adv. Funct. Mater. 31 2006736
    [35]
    Sun C et al 2021 High-performance large-area quasi-2D perovskite light-emitting diodes Nat. Commun. 12 2207–17
    [36]
    Wang J, Li D, Luo Y, Wang J and Peng J 2022 Inkjet printing efficient defined-pixel matrix perovskite light-emitting diodes with a polar polymer modification layer Adv. Mater. Technol. 2200370
    [37]
    Ban M et al 2018 Solution-processed perovskite light emitting diodes with efficiency exceeding 15% through additive-controlled nanostructure tailoring Nat. Commun. 9 3892–901
  • mfac9b2dsupp1.pdf
  • 加载中

Catalog

    Figures(1)

    Article Metrics

    Article Views(302) PDF downloads(65)
    Article Statistics
    Related articles from

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return