Citation: | Shuo Wang, Minghua Li, Yan Jiang, Jinsong Hu. Instability of solution-processed perovskite films: origin and mitigation strategies[J]. Materials Futures, 2023, 2(1): 012102. doi: 10.1088/2752-5724/acb838 |
[1] |
Dong Q, Fang Y, Shao Y, Mulligan P, Qiu J, Cao L and Huang J 2015 Electron-hole diffusion lengths > 175 µm in solution-grown CH3NH3PbI3 single crystals Science 347 967
|
[2] |
Shi D et al 2015 Solar cells. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals Science 347 519–22
|
[3] |
Lu H, Krishna A, Zakeeruddin S M, Grätzel M and Hagfeldt A 2020 Compositional and interface engineering of organic-inorganic lead halide perovskite solar cells iScience 23 101359
|
[4] |
Burschka J, Pellet N, Moon S-J, Humphry-Baker R, Gao P, Nazeeruddin M K and Grätzel M 2013 Sequential deposition as a route to high-performance perovskite-sensitized solar cells Nature 499 316–9
|
[5] |
Jeon N J, Noh J H, Kim Y C, Yang W S, Ryu S and Seok S I 2014 Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells Nat. Mater. 13 897–903
|
[6] |
Deng Y, Zheng X, Bai Y, Wang Q, Zhao J and Huang J 2018 Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules Nat. Energy 3 560–6
|
[7] |
Lu M, Zhang Y, Wang S, Guo J, Yu W W and Rogach A L 2019 Metal halide perovskite light-emitting devices: promising technology for next-generation displays Adv. Funct. Mater. 29 1902008
|
[8] |
Yuant F et al 2020 Color-pure red light-emitting diodes based on two-dimensional lead-free perovskites Sci. Adv. 6 eabb0253
|
[9] |
Tan Z-K et al 2014 Bright light-emitting diodes based on organometal halide perovskite Nat. Nanotechnol. 9 687–92
|
[10] |
Xia H-R, Li J, Sun W-T and Peng L-M 2014 Organohalide lead perovskite based photodetectors with much enhanced performance Chem. Commun. 50 13695–7
|
[11] |
Wang H and Kim D H 2011 Perovskite-based photodetectors: materials and devices Chem. Soc. Rev. 40 15–18
|
[12] |
Dou L, Yang Y M, You J, Hong Z, Chang W-H, Li G and Yang Y 2014 Solution-processed hybrid perovskite photodetectors with high detectivity Nat. Commun. 5 5404
|
[13] |
Saidaminov M I, Adinolfi V, Comin R, Abdelhady A L, Peng W, Dursun I, Yuan M, Hoogland S, Sargent E H and Bakr O M 2015 Planar-integrated single-crystalline perovskite photodetectors Nat. Commun. 6 8724
|
[14] |
Kim Y C, Kim K H, Son D-Y, Jeong D-N, Seo J-Y, Choi Y S, Han I T, Lee S Y and Park N-G 2017 Printable organometallic perovskite enables large-area, low-dose x-ray imaging Nature 550 87–91
|
[15] |
He S, Qiu L, Ono L K and Qi Y 2020 How far are we from attaining 10-year lifetime for metal halide perovskite solar cells? Mater. Sci. Eng. R 140 100545
|
[16] |
Li J, Han Z, Gu Y, Yu D, Liu J, Hu D, Xu X and Zeng H 2021 Perovskite single crystals: synthesis, optoelectronic properties, and application Adv. Funct. Mater. 31 2008684
|
[17] |
Kojima A, Teshima K, Shirai Y and Miyasaka T 2009 Organometal halide perovskites as visible-light sensitizers for photovoltaic cells J. Am. Chem. Soc. 131 6050–1
|
[18] |
Jiang Q, Chu Z, Wang P, Yang X, Liu H, Wang Y, Yin Z, Wu J, Zhang X and You J 2017 Planar-structure perovskite solar cells with efficiency beyond 21% Adv. Mater. 29 1703852
|
[19] |
Bishop J E, Routledge T J and Lidzey D G 2018 Advances in spray-cast perovskite solar cells J. Phys. Chem. Lett. 9 1977–84
|
[20] |
Park N-G and Zhu K 2020 Scalable fabrication and coating methods for perovskite solar cells and solar modules Nat. Rev. Mater. 5 333–50
|
[21] |
Huang H-H et al 2021 A simple one-step method with wide processing window for high-quality perovskite mini-module fabrication Joule 5 958–74
|
[22] |
Xiao Z, Dong Q, Bi C, Shao Y, Yuan Y and Huang J 2014 Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement Adv. Mater. 26 6503–9
|
[23] |
Nie W et al 2015 High-efficiency solution-processed perovskite solar cells with millimeter-scale grains Science 347 522–5
|
[24] |
Min H et al 2021 Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes Nature 598 444–50
|
[25] |
Ding Y et al 2022 Single-crystalline TiO2 nanoparticles for stable and efficient perovskite modules Nat. Nanotechnol. 17 598–605
|
[26] |
Yan C et al 2018 Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment Nat. Energy 3 764–72
|
[27] |
Ma C and Park N-G 2020 A realistic methodology for 30% efficient perovskite solar cells Chemistry 6 1254–64
|
[28] |
Liu M, Johnston M B and Snaith H J 2013 Efficient planar heterojunction perovskite solar cells by vapour deposition Nature 501 395–8
|
[29] |
Feng J, Jiao Y, Wang H, Zhu X, Sun Y, Du M, Cao Y, Yang D and Liu S F 2021 High-throughput large-area vacuum deposition for high-performance formamidine-based perovskite solar cells Energy Environ. Sci. 14 3035–43
|
[30] |
Jiang Y, Leyden M R, Qiu L, Wang S, Ono L K, Wu Z, Juarez-Perez E J and Qi Y 2018 Combination of hybrid CVD and cation exchange for upscaling Cs-substituted mixed cation perovskite solar cells with high efficiency and stability Adv. Funct. Mater. 28 1703835
|
[31] |
Jiang Y et al 2019 Negligible-Pb-waste and upscalable perovskite deposition technology for high-operational-stability perovskite solar modules Adv. Energy Mater. 9 1803047
|
[32] |
Jiang Y, He S, Qiu L, Zhao Y and Qi Y 2022 Perovskite solar cells by vapor deposition based and assisted methods Appl. Phys. Rev. 9 021305
|
[33] |
Khenkin M V et al 2020 Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures Nat. Energy 5 35–49
|
[34] |
Zhu Y, Hu M, Xu M, Zhang B, Huang F, Cheng Y-B and Lu J 2022 Bilayer metal halide perovskite for efficient and stable solar cells and modules Mater. Futures 1 042102
|
[35] |
Boyd C C, Cheacharoen R, Leijtens T and McGehee M D 2019 Understanding degradation mechanisms and improving stability of perovskite photovoltaics Chem. Rev. 119 3418–51
|
[36] |
Li F and Liu M 2017 Recent efficient strategies for improving the moisture stability of perovskite solar cells J. Mater. Chem. A 5 15447–59
|
[37] |
Yin W-J, Yang J-H, Kang J, Yan Y and Wei S-H 2015 Halide perovskite materials for solar cells: a theoretical review J. Mater. Chem. A 3 8926
|
[38] |
Wu J, Liu S-C, Li Z, Wang S, Xue D-J, Lin Y and Hu J-S 2021 Strain in perovskite solar cells: origins, impacts and regulation Natl Sci. Rev. 8 nwab047
|
[39] |
Qiu Z, Li N, Huang Z, Chen Q and Zhou H 2020 Recent advances in improving phase stability of perovskite solar cells Small Methods 4 1900877
|
[40] |
Pareja-Rivera C, Solís-Cambero A L, Sánchez-Torres M, Lima E and Solis-Ibarra D 2018 On the true composition of mixed-cation perovskite films ACS Energy Lett. 3 2366–7
|
[41] |
Zhang Y, Seo S, Lim S Y, Kim Y, Kim S-G, Lee D-K, Lee S-H, Shin H, Cheong H and Park N-G 2020 Achieving reproducible and high-efficiency (>21%) perovskite solar cells with a presynthesized FAPbI3 powder ACS Energy Lett. 5 360–6
|
[42] |
Shin G S, Zhang Y and Park N-G 2020 Stability of precursor solution for perovskite solar cell: mixture (FAI+PbI2) versus synthetic FAPbI3 crystal ACS Appl. Mater. Interfaces 12 15167–74
|
[43] |
Kim G M, Ishii A, Öz S and Miyasaka T 2020 MACl-assisted Ge doping of Pb-hybrid perovskite: a universal route to stabilize high performance perovskite solar cells Adv. Energy Mater. 10 1903299–n/a.
|
[44] |
Liu Z et al 2017 Chemical reduction of intrinsic defects in thicker heterojunction planar perovskite solar cells Adv. Mater. 29 1606774
|
[45] |
Chen S, Xiao X, Gu H and Huang J 2021 Iodine reduction for reproducible and high-performance perovskite solar cells and modules Sci. Adv. 7 eabe8130
|
[46] |
Kim J et al 2020 Unveiling the relationship between the perovskite precursor solution and the resulting device performance J. Am. Chem. Soc. 142 6251–60
|
[47] |
Chen C, Rao Y, Li Z, Wang X, Cui G, Wang W and Pang S 2021 Stabilizing formamidinium lead iodide perovskite precursor solution with phenylboric acid Sol. RRL 5 2000715
|
[48] |
Qin M et al 2018 Fused-ring electron acceptor ITIC-Th: a novel stabilizer for halide perovskite precursor solution Adv. Energy Mater. 8 1703399
|
[49] |
Wu X et al 2019 Stable triple cation perovskite precursor for highly efficient perovskite solar cells enabled by interaction with 18C6 stabilizer Adv. Funct. Mater. 30 1908613
|
[50] |
Juarez-Perez E J, Hawash Z, Raga S R, Ono L K and Qi Y 2016 Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis Energy Environ. Sci. 9 3406
|
[51] |
Wang S, Jiang Y, Juarez-Perez E J, Ono L K and Qi Y 2016 Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour Nat. Energy 2 1–8
|
[52] |
Chen S et al 2020 General decomposition pathway of organic-inorganic hybrid perovskites through an intermediate superstructure and its suppression mechanism Adv. Mater. 32 2001107
|
[53] |
Shi L et al 2020 Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells Science 368 eaba2412
|
[54] |
An Y, Hidalgo J, Perini C A R, Castro-Méndez A-F, Vagott J N, Bairley K, Wang S, Li X and Correa-Baena J-P 2021 Structural stability of formamidinium- and cesium-based halide perovskites ACS Energy Lett. 6 1942–69
|
[55] |
Li Z, Yang M, Park J-S, Wei S-H, Berry J J and Zhu K 2016 Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys Chem. Mater. 28 284–92
|
[56] |
Wang X et al 2020 Perovskite solution aging: what happened and how to inhibit? Chemistry 6 1369–78
|
[57] |
He X, Guo P, Wu J, Tu Y, Lan Z, Lin J and Huang M 2017 Hybrid perovskite by mixing formamidinium and methylammonium lead iodides for high-performance planar solar cells with efficiency of 19.41% Sol. Energy 157 853–9
|
[58] |
Gao X-X, Luo W, Zhang Y, Hu R, Zhang B, Züttel A, Feng Y and Nazeeruddin M K 2020 Stable and high-efficiency methylammonium-free perovskite solar cells Adv. Mater. 32 1905502
|
[59] |
Jeong J et al 2021 Pseudo-halide anion engineering for alpha-FAPbI3 perovskite solar cells Nature 592 381–5
|
[60] |
Kim G, Min H, Lee K S, Lee D Y, Yoon S M and Seok S I 2020 Impact of strain relaxation on performance of alpha-formamidinium lead iodide perovskite solar cells Science 370 108–12
|
[61] |
Min H, Kim M, Lee S-U, Kim H, Kim G, Choi K, Lee J H and Seok S I 2019 Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide Science 366 749–53
|
[62] |
Li B, Binks D, Cao G and Tian J 2019 Engineering halide perovskite crystals through precursor chemistry Small 15 1903613
|
[63] |
Yoo J W, Jang J, Kim U, Lee Y, Ji S-G, Noh E, Hong S, Choi M and Seok S I 2021 Efficient perovskite solar mini-modules fabricated via bar-coating using 2-methoxyethanol-based formamidinium lead tri-iodide precursor solution Joule 5 2420–36
|
[64] |
Xiao M, Huang F, Huang W, Dkhissi Y, Zhu Y, Etheridge J, Gray-Weale A, Bach U, Cheng Y-B and Spiccia L 2014 A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells Angew. Chem., Int. Ed. 53 9898–903
|
[65] |
Zakutayev A, Caskey C M, Fioretti A N, Ginley D S, Vidal J, Stevanovic V, Tea E and Lany S 2014 Defect tolerant semiconductors for solar energy conversion J. Phys. Chem. Lett. 5 1117–25
|
[66] |
Han T-H, Tan S, Xue J, Meng L, Lee J-W and Yang Y 2019 Interface and defect engineering for metal halide perovskite optoelectronic devices Adv. Mater. 31 1803515
|
[67] |
Niu G, Li W, Meng F, Wang L, Dong H and Qiu Y 2014 Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells J. Mater. Chem. A 2 705–10
|
[68] |
Conings B et al 2015 Intrinsic thermal instability of methylammonium lead trihalide perovskite Adv. Energy Mater. 5 1500477
|
[69] |
Juarez-Perez E J, Ono L K and Qi Y 2019 Thermal degradation of formamidinium based lead halide perovskites into sym-triazine and hydrogen cyanide observed by coupled thermogravimetry mass spectrometry analysis J. Mater. Chem. A 7 16912
|
[70] |
Zhang H and Park N G 2022 Strain control to stabilize perovskite solar cells Angew. Chem., Int. Ed. 61 e202212268
|
[71] |
Saidaminov M I et al 2018 Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air Nat. Energy 3 648–54
|
[72] |
Zhu C et al 2019 Strain engineering in perovskite solar cells and its impacts on carrier dynamics Nat. Commun. 10 1–11
|
[73] |
Xue D-J et al 2020 Regulating strain in perovskite thin films through charge-transport layers Nat. Commun. 11 1–8
|
[74] |
Qiu F-Z, Li M-H, Wang S, Jiang Y, Qi J-J and Hu J-S 2022 Strain relaxation and domain enlargement via phase transition towards efficient CsPbI2Br solar cells J. Mater. Chem. A 10 3513–21
|
[75] |
Chen Y et al 2020 Strain engineering and epitaxial stabilization of halide perovskites Nature 577 209–15
|
[76] |
Jiang Y, Juarez-Perez E J, Ge Q, Wang S, Leyden M R, Ono L K, Raga S R, Hu J and Qi Y 2016 Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells Mater. Horiz. 3 548–55
|
[77] |
Rui Y, Jin Z, Fan X, Li W, Li B, Li T, Wang Y, Wang L and Liang J 2022 Defect passivation and electrical conductivity enhancement in perovskite solar cells using functionalized graphene quantum dots Mater. Futures 1 045101
|
[78] |
Yuan Y and Huang J 2016 Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability Acc. Chem. Res. 49 286–93
|
[79] |
Zhang C-X, Shen T, Guo D, Tang L-M, Yang K and Deng H-X 2020 Reviewing and understanding the stability mechanism of halide perovskite solar cells InfoMat 2 1034–56
|
[80] |
Barker A J et al 2017 Defect-assisted photoinduced halide segregation in mixed-halide perovskite thin films ACS Energy Lett. 2 1416–24
|
[81] |
Ruth A, Brennan M C, Draguta S, Morozov Y V, Zhukovskyi M, Janko B, Zapol P and Kuno M 2018 Vacancy-mediated anion photosegregation kinetics in mixed halide hybrid perovskites: coupled kinetic Monte Carlo and optical measurements ACS Energy Lett. 3 2321–8
|
[82] |
Gao F, Zhao Y, Zhang X and You J 2020 Recent progresses on defect passivation toward efficient perovskite solar cells Adv. Energy Mater. 10 1902650
|
[83] |
Buin A, Pietsch P, Xu J, Voznyy O, Ip A H, Comin R and Sargent E H 2014 Materials processing routes to trap-free halide perovskites Nano Lett. 14 6281–6
|
[84] |
Liu N and Yam C 2018 First-principles study of intrinsic defects in formamidinium lead triiodide perovskite solar cell absorbers Phys. Chem. Chem. Phys. 20 6800–4
|
[85] |
Liang J et al 2019 Defect-engineering-enabled high-efficiency all-inorganic perovskite solar cells Adv. Mater. 31 1903448
|
[86] |
Chen Q, Zhou H, Song T-B, Luo S, Hong Z, Duan H-S, Dou L, Liu Y and Yang Y 2014 Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells Nano Lett. 14 4158–63
|
[87] |
Shao Y, Xiao Z, Bi C, Yuan Y and Huang J 2014 Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells Nat. Commun. 5 5784
|
[88] |
Shi J, Li Y, Li Y, Li D, Luo Y, Wu H and Meng Q 2018 From ultrafast to ultraslow: charge-carrier dynamics of perovskite solar cells Joule 2 1–23
|
[89] |
Doherty T A S et al 2020 Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites Nature 580 360–6
|
[90] |
Ni Z et al 2020 Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells Science 367 1352–8
|
[91] |
Kato Y, Ono L K, Lee M V, Wang S, Raga S R and Qi Y 2015 Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes Adv. Mater. Interfaces 2 1500195
|
[92] |
Yuan Y, Wang Q, Shao Y, Lu H, Li T, Gruverman A and Huang J 2016 Electric-field-driven reversible conversion between methylammonium lead triiodide perovskites and lead iodide at elevated temperatures Adv. Energy Mater. 6 1501803
|
[93] |
Li Z et al 2017 Extrinsic ion migration in perovskite solar cells Energy Environ. Sci. 10 1234–42
|
[94] |
Domanski K, Correa-Baena J-P, Mine N, Nazeeruddin M K, Abate A, Saliba M, Tress W, Hagfeldt A and Gratzel M 2016 Not all that glitters is gold: metal-migration-induced degradation in perovskite solar cells ACS Nano 10 6306–14
|
[95] |
Jiang Y, Yang S-C, Jeangros Q, Pisoni S, Moser T, Buecheler S, Tiwari A N and Fu F 2020 Mitigation of vacuum and illumination-induced degradation in perovskite solar cells by structure engineering Joule 4 1087–103
|
[96] |
Masi S, Gualdrón-Reyes A F and Mora-Seró I 2020 Stabilization of black perovskite phase in FAPbI3 and CsPbI3 ACS Energy Lett. 5 1974–85
|
[97] |
Marronnier A, Roma G, Boyer-Richard S, Pedesseau L, Jancu J-M, Bonnassieux Y, Katan C, Stoumpos C C, Kanatzidis M G and Even J 2018 Anharmonicity and disorder in the black phases of cesium lead iodide used for stable inorganic perovskite solar cells ACS Nano 12 3477–86
|
[98] |
Chen T, Foley B J, Park C, Brown C M, Harriger L W, Lee J, Ruff J, Yoon M, Choi J J and Lee S-H 2016 Entropydriven structural transition and kinetic trapping in formamidinium lead iodide perovskite Sci. Adv. 2 e1601650
|
[99] |
Hoke E T, Slotcavage D J, Dohner E R, Bowring A R, Karunadasa H I and McGehee M D 2015 Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics Chem. Sci. 6 613–7
|
[100] |
Li W et al 2017 Phase segregation enhanced ion movement in efficient inorganic CsPbIBr2 solar cells Adv. Energy Mater. 7 1700946
|
[101] |
Yoon S J, Kuno M and Kamat P V 2017 Shift happens. How halide ion defects influence photoinduced segregation in mixed halide perovskites ACS Energy Lett. 2 1507–14
|
[102] |
Lin Y et al 2018 Excess charge-carrier induced instability of hybrid perovskites Nat. Commun. 9 1–9
|
[103] |
Belisle R A, Bush K A, Bertoluzzi L, Gold-Parker A, Toney M F and McGehee M D 2018 Impact of surfaces on photoinduced halide segregation in mixed-halide perovskites ACS Energy Lett. 3 2694–700
|
[104] |
Brennan M C, Draguta S, Kamat P V and Kuno M 2018 Light-induced anion phase segregation in mixed halide perovskites ACS Energy Lett. 3 204–13
|
[105] |
Braly I L, Stoddard R J, Rajagopal A, Uhl A R, Katahara J K, Jen A K-Y and Hillhouse H W 2017 Current-induced phase segregation in mixed halide hybrid perovskites and its impact on two-terminal tandem solar cell design ACS Energy Lett. 2 1841–7
|
[106] |
Bischak C G, Hetherington C L, Wu H, Aloni S, Ogletree D F, Limmer D T and Ginsberg N S 2017 Origin of reversible photoinduced phase separation in hybrid perovskites Nano Lett. 17 1028–33
|
[107] |
Chen Y et al 2019 Impacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells Nat. Commun. 10 1112
|
[108] |
Lee S J, Heo J H and Im S H 2020 Large-scale synthesis of uniform PbI2(DMSO) complex powder by solvent extraction method for efficient metal halide perovskite solar cells ACS Appl. Mater. Interfaces 12 8233–9
|
[109] |
Ran C, Gao W, Li N, Xia Y, Li Q, Wu Z, Zhou H, Chen Y, Wang M and Huang W 2019 Facet-dependent control of PbI2 colloids for over 20% efficient perovskite solar cells ACS Energy Lett. 4 358–67
|
[110] |
Long M et al 2017 Large-grain formamidinium PbI3−xBrx for high-performance perovskite solar cells via intermediate halide exchange Adv. Energy Mater. 7 1601882
|
[111] |
Zhang W et al 2015 Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells Nat. Commun. 6 10030
|
[112] |
Min H, Kim G, Paik M J, Lee S, Yang W S, Jung M and Seok S I 2019 Stabilization of precursor solution and perovskite layer by addition of sulfur Adv. Energy Mater. 9 1803476
|
[113] |
Ming Y, Xu M, Liu S, Li D, Wang Q, Hou X, Hu Y, Rong Y and Han H 2019 Ethanol stabilized precursors for highly reproducible printable mesoscopic perovskite solar cells J. Power Sources 424 261–7
|
[114] |
Chao L, Xia Y, Li B, Xing G, Chen Y and Huang W 2019 Room-temperature molten salt for facile fabrication of efficient and stable perovskite solar cells in ambient air Chemistry 5 995–1006
|
[115] |
Noel N K, Habisreutinger S N, Wenger B, Klug M T, Hörantner M T, Johnston M B, Nicholas R J, Moore D T and Snaith H J 2017 A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films Energy Environ. Sci. 10 145–52
|
[116] |
Deng Y, Van Brackle C H, Dai X, Zhao J, Chen B and Huang J 2019 Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films Sci. Adv. 5 eaax7537
|
[117] |
Noel N K, Congiu M, Ramadan A J, Fearn S, McMeekin D P, Patel J B, Johnston M B, Wenger B and Snaith H J 2017 Unveiling the influence of pH on the crystallization of hybrid perovskites, delivering low voltage loss photovoltaics Joule 1 328–43
|
[118] |
Li L, Chen Y, Liu Z, Chen Q, Wang X and Zhou H 2016 The additive coordination effect on hybrids perovskite crystallization and high-performance solar cell Adv. Mater. 28 9862–8
|
[119] |
Son D-Y, Kim S-G, Seo J-Y, Lee S-H, Shin H, Lee D and Park N-G 2018 Universal approach toward hysteresis-free perovskite solar cell via defect engineering J. Am. Chem. Soc. 140 1358–64
|
[120] |
Zhao W, Yao Z, Yu F, Yang D and Liu S F 2018 Alkali metal doping for improved CH3NH3PbI3 perovskite solar cells Adv. Sci. 5 1700131
|
[121] |
Prochowicz D et al 2019 Engineering of perovskite materials based on formamidinium and cesium hybridization for high-efficiency solar cells Chem. Mater. 31 1620–7
|
[122] |
Abdi-Jalebi M, Andaji-Garmaroudi Z, Pearson A J, Divitini G, Cacovich S, Philippe B, Rensmo H, Ducati C, Friend R H and Stranks S D 2018 Potassium- and rubidium-passivated alloyed perovskite films: optoelectronic properties and moisture stability ACS Energy Lett. 3 2671–8
|
[123] |
Bu T, Li J, Zheng F, Chen W, Wen X, Ku Z, Peng Y, Zhong J, Cheng Y-B and Huang F 2018 Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module Nat. Commun. 9 4609
|
[124] |
Zhao Y et al 2018 Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells Nat. Commun. 9 1607
|
[125] |
Saliba M et al 2016 Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance Science 354 206–9
|
[126] |
Saliba M et al 2016 Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency Energy Environ. Sci. 9 1989
|
[127] |
Turren-Cruz S-H, Hagfeldt A and Saliba M 2018 Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture Science 362 449–53
|
[128] |
Abdi-Jalebi M et al 2018 Maximizing and stabilizing luminescence from halide perovskites with potassium passivation Nature 555 497–501
|
[129] |
Wang L et al 2019 A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells Science 363 265–70
|
[130] |
Wu Y, Wan L, Fu S, Zhang W, Li X and Fang J 2019 Liquid metal acetate assisting preparation of high-efficiency and stable inverted perovskite solar cells J. Mater. Chem. A 7 14136–44
|
[131] |
Xu W, Zheng L, Zhang X, Cao Y, Meng T, Wu D, Liu L, Hu W and Gong X 2018 Efficient perovskite solar cells fabricated by Co partially substituted hybrid perovskite Adv. Energy Mater. 8 1703178
|
[132] |
Li N et al 2019 Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells Nat. Energy 4 408–15
|
[133] |
Yang G, Zhang H, Li G and Fang G 2019 Stabilizer-assisted growth of formamdinium-based perovskites for highly efficient and stable planar solar cells with over 22% efficiency Nano Energy 63 103835
|
[134] |
Yoo J J et al 2021 Efficient perovskite solar cells via improved carrier management Nature 590 587–93
|
[135] |
Arora N, Dar M I, Hinderhofer A, Pellet N, Schreiber F, Zakeeruddin S M and Grätzel M 2017 Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20% Science 358 768–71
|
[136] |
Lee J, Singh S, Kim S and Baik S 2020 Graphene interfacial diffusion barrier between CuSCN and Au layers for stable perovskite solar cells Carbon 157 731–40
|
[137] |
Wang Y, Wu T, Barbaud J, Kong W, Cui D, Chen H, Yang X and Han L 2019 Stabilizing heterostructures of soft perovskite semiconductors Science 365 687–91
|
[138] |
Kim D et al 2020 Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites Science 368 155–60
|
[139] |
Yang S et al 2019 Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts Science 365 473–8
|
[140] |
Parikh N, Tavakoli M M, Pandey M, Kalam A, Prochowicz D and Yadav P 2021 Role of the spacer cation in the growth and crystal orientation of two-dimensional perovskites Sustain. Energy Fuels 5 1255–79
|
[141] |
Zhang X, Yang T, Ren X, Zhang L, Zhao K and Liu S 2021 Film formation control for high performance Dion–Jacobson 2D perovskite solar cells Adv. Energy Mater. 11 2002733
|
[142] |
Zhang Y et al 2019 Dynamical transformation of two-dimensional perovskites with alternating cations in the interlayer space for high-performance photovoltaics J. Am. Chem. Soc. 141 2684–94
|
[143] |
Zhu X et al 2018 Vapor-fumigation for record efficiency two-dimensional perovskite solar cells with superior stability Energy Environ. Sci. 11 3349–57
|
[144] |
Lv G, Li L, Lu D, Xu Z, Dong Y, Li Q, Chang Z, Yin W-J and Liu Y 2021 Multiple-noncovalent-interaction-stabilized layered Dion-Jacobson perovskite for efficient solar cells Nano Lett. 21 5788–97
|
[145] |
Ke W, Mao L, Stoumpos C C, Hoffman J, Spanopoulos I, Mohite A D and Kanatzidis M G 2019 Compositional and solvent engineering in Dion-Jacobson 2D perovskites boosts solar cell efficiency and stability Adv. Energy Mater. 9 1803384
|
[146] |
Wu H, Lian X, Li J, Zhang Y, Zhou G, Wen X, Xie Z, Zhu H, Wu G and Chen H 2021 Merged interface construction toward ultra-low Voc loss in inverted two-dimensional Dion–Jacobson perovskite solar cells with efficiency over 18% J. Mater. Chem. A 9 12566–73
|
[147] |
Yang J et al 2021 Stable 2D alternating cation perovskite solar cells with power conversion efficiency >19% via solvent engineering Sol. RRL 5 2100286
|
[148] |
Lai H, Lu D, Xu Z, Zheng N, Xie Z and Liu Y 2020 Organic-salt-assisted crystal growth and orientation of quasi-2D Ruddlesden–Popper perovskites for solar cells with efficiency over 19% Adv. Mater. 32 2001470
|
[149] |
Li Q, Dong Y, Lv G, Liu T, Lu D, Zheng N, Dong X, Xu Z, Xie Z and Liu Y 2021 Fluorinated aromatic formamidinium spacers boost efficiency of layered Ruddlesden-Popper perovskite solar cells ACS Energy Lett. 6 2072–80
|
[150] |
Fu W, Liu H, Shi X, Zuo L, Li X and Jen A K Y 2019 Tailoring the functionality of organic spacer cations for efficient and stable quasi-2D perovskite solar cells Adv. Funct. Mater. 29 1900221
|
[151] |
Wu G et al 2019 Fine multi-phase alignments in 2D perovskite solar cells with efficiency over 17% via slow post-annealing Adv. Mater. 31 1903889
|
[152] |
Tan S et al 2019 Effect of high dipole moment cation on layered 2D organic–inorganic halide perovskite solar cells Adv. Energy Mater. 9 1803024
|
[153] |
Tsai H et al 2016 High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells Nature 536 312–6
|
[154] |
Ren H et al 2020 Efficient and stable Ruddlesden–Popper perovskite solar cell with tailored interlayer molecular interaction Nat. Photon. 14 154–63
|
[155] |
Liang C et al 2021 Two-dimensional Ruddlesden–Popper layered perovskite solar cells based on phase-pure thin films Nat. Energy 6 38–45
|
[156] |
Dong Y, Lu D, Xu Z, Lai H and Liu Y 2020 2-thiopheneformamidinium-based 2D Ruddlesden–Popper perovskite solar cells with efficiency of 16.72% and negligible hysteresis Adv. Energy Mater. 10 2000694
|
[157] |
Wang H, Qin Z, Xie J, Zhao S, Liu K, Guo X, Li G, Lu X, Yan K and Xu J 2020 Efficient slantwise aligned Dion–Jacobson phase perovskite solar cells based on trans-1,4-cyclohexanediamine Small 16 2003098
|
[158] |
Wang H, Chan C C S, Chu M, Xie J, Zhao S, Guo X, Miao Q, Wong K S, Yan K and Xu J 2020 Interlayer cross-linked 2D perovskite solar cell with uniform phase distribution and increased exciton coupling Sol. RRL 4 1900578
|
[159] |
Li F, Zhang J, Jo S, Qin M, Li Z, Liu T, Lu X, Zhu Z and Jen A K Y 2020 Vertical orientated Dion–Jacobson quasi-2D perovskite film with improved photovoltaic performance and stability Small Methods 4 1900831
|
[160] |
Di L, Lv G, Xu Z, Dong Y, Ji X and Liu Y 2020 Thiophene-based two-dimensional Dion-Jacobson perovskite solar cells with over 15% efficiency J. Am. Chem. Soc. 142 11114–22
|
[161] |
Soe C M M et al 2017 New type of 2D perovskites with alternating cations in the interlayer space, (C(NH2)3)(CH3NH3)nPbnI3n+1: structure, properties, and photovoltaic performance J. Am. Chem. Soc. 139 16297–309
|
[162] |
Zhang Y, Chen J, Lian X, Qin M, Li J, Andersen T R, Lu X, Wu G, Li H and Chen H 2019 Highly efficient guanidinium-based quasi 2D perovskite solar cells via a two-step post-treatment process Small Methods 3 1900375
|
[163] |
Wu J et al 2019 A simple way to simultaneously release the interface stress and realize the inner encapsulation for highly efficient and stable perovskite solar cells Adv. Funct. Mater. 29 1905336
|
[164] |
Dou J et al 2021 Synergistic effects of Eu-MOF on perovskite solar cells with improved stability Adv. Mater. 33 e2102947
|
[165] |
Zhang H et al 2021 Multifunctional crosslinking-enabled strain-regulating crystallization for stable, efficient α-FAPbI3 -based perovskite solar cells Adv. Mater. 33 2008487
|
[166] |
Wang H et al 2019 Interfacial residual stress relaxation in perovskite solar cells with improved stability Adv. Mater. 31 1904408
|
[167] |
Wang S, Wang A, Deng X, Xie L, Xiao A, Li C, Xiang Y, Li T, Ding L and Hao F 2020 Lewis acid/base approach for efficacious defect passivation in perovskite solar cells J. Mater. Chem. A 8 12201–25
|
[168] |
Liu C et al 2020 Tailoring C60 for efficient inorganic CsPbI2Br perovskite solar cells and modules Adv. Mater. 32 1907361
|
[169] |
Zhang M et al 2019 Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells Nat. Commun. 10 4593
|
[170] |
Yang Z, Dou J, Kou S, Dang J, Ji Y, Yang G, Wu W-Q, Kuang D-B and Wang M 2020 Multifunctional phosphorus-containing lewis acid and base passivation enabling efficient and moisture-stable perovskite solar cells Adv. Funct. Mater. 30 1910710
|
[171] |
Dai Z, Yadavalli S K, Chen M, Abbaspourtamijani A, Qi Y and Padture N P 2021 Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability Science 372 618–22
|
[172] |
Fu X et al 2021 Halogen-halogen bonds enable improved long-term operational stability of mixed-halide perovskite photovoltaics Chemistry 7 3131–43
|
[173] |
Wu J, Fang Y, Zhang D, Zhang S, Wan J, Wen R, Zhou X, Fu N and Lin Y 2021 Efficient and stable perovskite solar cells based on a quasi-point-contact and rear-reflection structure with 22.5 efficiency J. Mater. Chem. A 9 14877–87
|
[174] |
Guo P, Ye Q, Liu C, Cao F, Yang X, Ye L, Zhao W, Wang H, Li L and Wang H 2020 Double barriers for moisture degradation: assembly of hydrolysable hydrophobic molecules for stable perovskite solar cells with high open-circuit voltage Adv. Funct. Mater. 30 2002639
|
[175] |
Wu C et al 2018 Highly-stable organo-lead halide perovskites synthesized through green self-assembly process Sol. RRL 2 1800052
|
[176] |
Wang R et al 2019 Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics Science 366 1509–13
|
[177] |
Zhao Y et al 2020 A polymerization-assisted grain growth strategy for efficient and stable perovskite solar cells Adv. Mater. 32 1907769
|
[178] |
Xie L, Xie J, Wang S, Chen B, Yang C, Wang Z, Liu X, Chen J, Jia K and Hao F 2021 Fluorinated oligomer wrapped perovskite crystals for inverted MAPbI3 solar cells with 21% efficiency and enhanced stability ACS Appl. Mater. Interfaces 13 26093–101
|
[179] |
Li X, Zhang W, Wang Y-C, Zhang W, Wang H-Q and Fang J 2018 In-situ cross-linking strategy for efficient and operationally stable methylammoniun lead iodide solar cells Nat. Commun. 9 3806–10
|
[180] |
Wang R et al 2019 Caffeine improves the performance and thermal stability of perovskite solar cells Joule 3 1464–77
|
[181] |
Xiong S et al 2021 Direct observation on p- to n-type transformation of perovskite surface region during defect passivation driving high photovoltaic efficiency Joule 5 467–80
|
[182] |
Li E, Liu C, Lin H, Xu X, Liu S, Zhang S, Yu M, Cao X-M, Wu Y and Zhu W-H 2021 Bonding strength regulates anchoring-based self-assembly monolayers
|